|
For v0.8.2 (16 Jul 2016)
All versions
|
Table of contentsNAMESYNOPSIS DESCRIPTION OPTIONS General keys Basic Movement Movement with Count Scrolling panes Pane manipulation Marks Searching File Filters Other Normal Mode Keys Using Count Registers Selectors Visual Mode View Mode Command line Mode Pasting special values Command line editing More Mode Commands Ranges Command macros Command backgrounding Cancellation Patterns Globs :set options Mappings Expression syntax Functions Menus and dialogs Custom views Startup Configure Automatic FUSE mounts View look ls-like view Column view Color schemes Trash directory Client-Server Plugin Reserved ENVIRONMENT SEE ALSO AUTHOR NAMEvifm - vi file manager SYNOPSISvifm
[OPTION]... DESCRIPTIONVifm is an ncurses based file manager with vi like keybindings. If you use vi, vifm gives you complete keyboard control over your files without having to learn a new set of commands. OPTIONSvifm starts in the current directory unless it is given a different directory on the command line or ’vifminfo’ option includes "savedirs" (in which case last visited directories are used as defaults).
<path> <path> Starts Vifm in the specified paths. Specifying two directories triggers split view even when vifm was in single-view mode on finishing previous session. To suppress this behaviour :only command can be put in the vifmrc file. When only one path argument is found on command-line, the left/top pane is automatically set as the current view. Paths to files
are also allowed in case you want vifm to start with some
archive opened. Open parent directory of the given path and select specified file in it.
--choose-files <path>|- Sets output file to write selection into on exit instead of opening files. "-" means standard output. Use empty value to disable it. --choose-dir <path>|- Sets output file to write last visited directory into on exit. "-" means standard output. Use empty value to disable it. --delimiter <delimiter> Sets separator for list of file paths written out by vifm. Empty value means null character. Default is new line character. --on-choose <command> Sets command to be executed on selected files instead of opening them. The command may use any of macros described in "Command macros" section below. The command is executed once for whole selection. --logging[=<startup log path>] Log some operational details $VIFM/log. If the optional startup log path is specified and permissions allow to open it for writing, then logging of early initialization (before value of $VIFM is determined) is put there. --server-list List available server names and exit. --server-name <name> Name of target or this instance (sequential numbers are appended on name conflict). --remote Sends the rest of command line to the active vifm server (one of already running instances if any). When there is no server, quits silently. There is no limit on how many arguments can be processed. One can combine --remote with -c <command> or +<command> to execute command in already running instance of vifm. See also "Client-Server" section below. -c <command> or +<command> Run command-line mode <command> on startup. Commands in such arguments are executed in the order they appear in command line. Commands with spaces or special symbols must be enclosed in double or single quotes or all special symbols should be escaped (the exact syntax strongly depends on shell). --help, -h Show a brief command summary and exit vifm. --version, -v Show version information and quit. --no-configs Skip reading vifmrc and vifminfo. See "Startup" section below for the explanations on $VIFM. General keysCtrl-C or Escape cancel most operations (see "Cancellation" section below), clear all selected files.
Basic MovementThe basic vi
key bindings are used to move through the files and pop-up
windows. move cursor up one line. j, gj or Ctrl-N move cursor down one line.
gl or Enter enter directory or launch a file.
Ctrl-F or Page Down move forward one page. Ctrl-B or Page Up move back one page.
Movement with CountMost movement
commands also accept a count, 12j would move down 12 move to percent of the file list. [count]j move down [count] files. [count]k move up [count] files. [count]G or [count]gg move to list position [count]. [count]h go up [count] directories. Scrolling panes
Pane manipulationSecond
character can be entered with or without Control key.
move the pane to the far left. Ctrl-W J move the pane to the very bottom. Ctrl-W K move the pane to the very top. Ctrl-W L move the pane to the far right. Ctrl-W h switch to the left pane. Ctrl-W j switch to the pane below. Ctrl-W k switch to the pane above. Ctrl-W l switch to the right pane. Ctrl-W b switch to bottom-right window. Ctrl-W t switch to top-left window. Ctrl-W p switch to previous window. Ctrl-W w switch to other pane. Ctrl-W o leave only one pane. Ctrl-W s split window horizontally. Ctrl-W v split window vertically. Ctrl-W x exchange panes. Ctrl-W z quit preview pane or view modes. Ctrl-W - decrease size of the view by count. Ctrl-W + increase size of the view by count. Ctrl-W < decrease size of the view by count. Ctrl-W > increase size of the view by count. Ctrl-W | set current view size to count. Ctrl-W _ set current view size to count. Ctrl-W = make size of two views equal. For Ctrl-W +, Ctrl-W -, Ctrl-W <, Ctrl-W >, Ctrl-W | and Ctrl-W _ commands count can be given before and/or after Ctrl-W. The resulting count is a multiplication of those two. So "2 Ctrl-W 2 -" decreases window size by 4 lines or columns. Ctrl-W | and Ctrl-W _ maximise current view by default. MarksMarks are set the same way as they are in vi. You can use
this characters for marks [a-z][A-Z][0-9].
set a mark for the file at the current cursor position. ’[a-z][A-Z][0-9] navigate to the file set for the mark. There are also several special marks that can’t be set manually:
Searching/regular expression pattern search for files matching regular expression in forward direction and advance cursor to next match.
?regular expression pattern search for files matching regular expression in backward direction and advance cursor to previous match.
Matches are automatically
selected if ’hlsearch’ is set. Enabling go to the next file matching last search pattern. Takes last search direction into account. [count]N go to the previous file matching last search pattern. Takes last search direction into account. If ’hlsearch’
option is set, hitting n/N to perform search and go to Note: vifm uses
extended regular expressions for / and ?. search forward for file with [character] as first character in name. Search wraps around the end of the list. [count]F[character] search backward for file with [character] as first character in name. Search wraps around the end of the list. [count]; find the next match of f or F. [count], find the previous match of f or F. Note: f, F, ; and , wrap around list beginning and end when they are used alone and they don’t wrap when they are used as selectors. File FiltersThere are three basic file filters:
Performing operations on manual filter for file names automatically does the same on automatic one. The file name filter is separated mainly for convenience purpose and to get more deterministic behaviour. The basic vim
folding key bindings are used for filtering files. " filter
directories which names end with ’.files’ " filter
files which names end with ’.d’ " filter
files and directories which names end with ’.o’
=regular expression pattern filter out files that don’t match regular expression. Whether view is updated as regular expression is changed depends on the value of the ’incsearch’ option. This kind of filter is automatically reset when directory is changed. Other Normal Mode Keys[count]: enter command line mode. [count] generates range.
[count]!! and [count]!<selector> enter command line mode with entered ! command. [count] modifies range.
Shift-Tab enters view mode (works only after activating view pane with :view command).
If file under cursor is selected, each selected item is processed, otherwise only current file is updated.
same as l key, but tries to run program with administrative privileges.
[reg]gs when no register is specified, restore last t selection (similar to what gv does for visual mode selection). If register is present, then all files listed in that register and which are visible in current view are selected. gu<selector> make names of selected files lowercase. [count]guu and [count]gugu make names of [count] files starting from the current one lowercase. Without [count] only current file is affected. gU<selector> make names of selected files uppercase. [count]gUU and [count]gUgU make names of [count] files starting from the current one uppercase. Without [count] only current file is affected.
change file owner.
change file group.
[count]C clone file [count] times. [count]dd or d[count]selector move selected file or files to trash directory (if ’trash’ option is set, otherwise delete). See "Trash directory" section below. [count]DD or D[count]selector like dd and d<selector>, but omitting trash directory (even when ’trash’ option is set). Y, [count]yy or y[count]selector yank selected files.
[count]Ctrl-A increment first number in file name by [count] (1 by default). [count]Ctrl-X decrement first number in file name by [count] (1 by default).
Using CountYou can use
count with commands like yy. yank count files starting from current cursor position downward. Or you can use count with
motions passed to y, d or D. delete (count + 1) files starting from current cursor position upward. Registersvifm supports multiple registers for temporary storing list of yanked or deleted files. Registers should be specified by hitting double quote key followed by a register name. Count is specified after register name. By default commands use unnamed register, which has double quote as its name. Though all commands accept registers, most of commands ignores them (for example H or Ctrl-U). Other commands can fill register or append new files to it. Presently vifm supports ", _, a-z and A-Z characters as register names. As mentioned above " is unnamed register and has special meaning of the default register. Every time when you use named registers (a-z and A-Z) unnamed register is updated to contain same list of files as the last used register. _ is black hole register. It can be used for writing, but its list is always empty. Registers with names from a to z and from A to Z are named ones. Lowercase registers are cleared before adding new files, while uppercase aren’t and should be used to append new files to the existing file list of appropriate lowercase register (A for a, B for b, ...). Registers can be changed on :empty command if they contain files under trash directory (see "Trash directory" section below). Registers do not contain one file more than once. Example: "a2yy puts names of two files to register a (and to the unnamed register), "Ad removes one file and append its name to register a (and to the unnamed register), p or "ap or "Ap inserts previously yanked and deleted files into current directory. Selectorsy, d, D, !, gu
and gU commands accept selectors. You can combine them Most of selectors are like vi motions: j, k, gg, G, H, L, M, %, f, F, ;, comma, ’, ^, 0 and $. But there are some additional ones.
Examples:
When you pass a count to whole command and its selector they are multiplied. So:
Visual ModeVisual mode has to generic operating submodes:
Both modes select files in range from cursor position at which visual mode was entered to current cursor position (let’s call it "selection region"). Each of two borders can be adjusted by swapping them via "o" or "O" keys and updating cursor position with regular cursor motion keys. Obviously, once initial cursor position is altered this way, real start position becomes unavailable. Plain Vim-like visual mode starts with cleared selection, which is not restored on rejecting selection ("Escape", "Ctrl-C", "v", "V"). Contrary to it, selection editing doesn’t clear previously selected files and restores them after reject. Accepting selection by performing an operation on selected items (e.g. yanking them via "y") moves cursor to the top of current selection region (not to the top most selected file of the view). In turn, selection editing supports three types of editing (look at statusbar to know which one is currently active):
No matter how you activate selection editing it starts in "append". One can switch type of operation (in the order given above) via "Ctrl-G" key. Almost all normal mode keys work in visual mode, but instead of accepting selectors they operate on selected items.
v, V, Ctrl-C or Escape leave visual mode if not in amending mode, otherwise switch to normal visual selection.
View ModeThis mode tries
to imitate the less program. List of builtin shortcuts can
be found below. Shortcuts can be customized using :qmap,
:qnoremap and :qunmap command-line commands. return to normal mode. [count]e, [count]Ctrl-E, [count]j, [count]Ctrl-N, [count]Enter scroll forward one line (or [count] lines). [count]y, [count]Ctrl-Y, [count]k, [count]Ctrl-K, [count]Ctrl-P scroll backward one line (or [count] lines). [count]f, [count]Ctrl-F, [count]Ctrl-V, [count]Space scroll forward one window (or [count] lines). [count]b, [count]Ctrl-B, [count]Alt-V scroll backward one window (or [count] lines). [count]z scroll forward one window (and set window to [count]). [count]w scroll backward one window (and set window to [count]). [count]Alt-Space scroll forward one window, but don’t stop at end-of-file. [count]d, [count]Ctrl-D scroll forward one half-window (and set half-window to [count]). [count]u, [count]Ctrl-U scroll backward one half-window (and set half-window to [count]). r, Ctrl-R, Ctrl-L repaint screen.
[count]/pattern search forward for ([count]-th) matching line. [count]?pattern search backward for ([count]-th) matching line. [count]n repeat previous search (for [count]-th occurrence). [count]N repeat previous search in reverse direction (for [count]-th occurrence). [count]g, [count]<, [count]Alt-< scroll to the first line of the file (or line [count]). [count]G, [count]>, [count]Alt-> scroll to the last line of the file (or line [count]). [count]p, [count]% scroll to the beginning of the file (or N percent into file).
All "Ctrl-W x" keys work the same was as in Normal mode. Active mode is automatically changed on navigating among windows. When less-like mode activated on file preview is left using one by "Ctrl-W x" keys, its state is stored until another file is displayed using preview (it’s possible to leave the mode, hide preview pane, do something else, then get back to the file and show preview pane again with previously stored state in it). Command line ModeThese keys are available in all submodes of the command line mode: command, search, prompt and filtering. Down, Up, Left,
Right, Home, End and Delete are extended keys and they are
not available if vifm is compiled with
--disable-extended-keys option.
leave command line mode, cancels input. Cancelled input is saved into appropriate history and can be recalled later. Ctrl-M, Enter execute command and leave command line mode. Ctrl-I, Tab complete command or its argument. Shift-Tab complete in reverse order.
Ctrl-B, Left move cursor to the left. Ctrl-F, Right move cursor to the right. Ctrl-A, Home go to line beginning. Ctrl-E, End go to line end.
Ctrl-H, Backspace remove character before the cursor. Ctrl-D, Delete remove character under the cursor.
Pasting special valuesThe shortcuts
listed below insert specified values into current cursor
position. Last key of every shortcut references value that
it inserts: - a
- [a]utomatic filter Values related
to filelist in current pane are available through Ctrl-X
prefix, while values from the other pane have doubled Ctrl-X
key as their prefix (doubled Ctrl-X is presumably easier to
type than uppercase letters; it’s still easy to remap
the keys to correspond to names of similar macros). name of the current file of the active pane. Ctrl-X d path to the current directory of the active pane. Ctrl-X e extension of the current file of the active pane. Ctrl-X r name root of current file of the active pane. Ctrl-X t the last component of path to the current directory of the active pane. Ctrl-X Ctrl-X c name of the current file of the inactive pane. Ctrl-X Ctrl-X d path to the current directory of the inactive pane. Ctrl-X Ctrl-X e extension of the current file of the inactive pane. Ctrl-X Ctrl-X r name root of current file of the inactive pane. Ctrl-X Ctrl-X t the last component of path to the current directory of the inactive pane. Ctrl-X a value of automatic filter of the active pane. Ctrl-X m value of manual filter of the active pane. Ctrl-X = value of local filter of the active pane. Ctrl-X / last pattern from search history. Command line editingvifm provides a
facility to edit several kinds of data, that is usually
edited in command-line mode, in external editor (using
command specified by 'vicmd' or ’vixcmd’
option). This has at least two advantages over built-in
command-line mode: The facility is
supported by four input submodes of the command-line: Editing command-line using external editor is activated by the Ctrl-G shortcut. It’s also possible to do almost the same from Normal and Visual modes using q:, q/ and q? commands. Temporary file created for the purpose of editing the line has the following structure:
After editing application is finished the first line of the file is taken as the result of operation, when the application returns zero exit code. If the application returns an error (see :cquit command in Vim), all the edits made to the file are ignored, but the initial value of the first line is saved in appropriate history. More ModeThis is the mode that appears when status bar content is so big that it doesn’t fit on the screen. One can identify the mode by "-- More --" message at the bottom. The following
keys are handled in this mode: scroll one line down. Backspace, k or Up scroll one line up.
Space, f or PageDown scroll down a screen. b or PageUp scroll up a screen.
q, Escape or Ctrl-C quit the mode.
CommandsCommands are executed with :command_name<Enter> Commented out lines should start with the double quote symbol ("), which may be preceded by whitespace characters intermixed with colons. Inline comments can be added at the end of the line after double quote symbol, only last line of a multi-line command can contain such comment. Not all commands support inline comments as their syntax conflicts with names of registers and fields where double quotes are allowed. Most of the commands have two forms: complete and the short one. Example: :noh[lsearch] This means the complete command is nohlsearch, and the short one is noh. Most of command-line commands completely reset selection in the current view. However, there are several exceptions:
'|' can be used to separate commands, so you can give multiple commands in one line. If you want to use ’|’ in an argument, precede it with ’\’. These commands see ’|’ as part of their arguments even when it’s escaped: :[range]! To be able to use another command after one of these, wrap it with the :execute command. An example: if filetype(’.’) == ’reg’ | execute ’!!echo regular file’ | endif :[count] move to the file number. :[count]command The only builtin :[count]command are :[count]d[elete] and :[count]y[ank].
:command [args] execute command via shell. Accepts macros. :[range]!command & same as above, but the command is run in the background using vifm’s means. Programs that write to stdout like "ls" create an error message showing partial output of the command. Note the space before ampersand symbol, if you omit it, command will be run in the background using job control of your shell. Accepts macros.
same as :!, but pauses before returning.
:alink create absolute symbolic links to files in directory of inactive view. With "?" prompts for destination file names in an editor. "!" forces overwrite. :[range]alink[!] path create absolute symbolic links to files in directory specified by the path (absolute or relative to directory of inactive view). :[range]alink[!] name1 name2... create absolute symbolic links of files in directory of other view giving each next link a corresponding name from the argument list. :apropos create a menu of items returned by the apropos command. Selecting an item in the menu opens corresponding man page. By default the command relies on the external "apropos" utility, which can be customized by altering value of the ’aproposprg’ option. :autocmd register autocommand for the
{event}, which can be: {pat} is a
comma-separated list of modified globs patterns, which can
contain tilde or environment variables. All paths use slash
(’/’) as directory separator. The pattern can
start with a ’!’, which negates it. Patterns
that do not contain slashes are matched against the last
item of the path only (e.g. "dir" in
"/path/dir"). Literal comma can be entered by
doubling it. Two modifications to globs matching are as
follows: {cmd} is a :command or several of them separated with ’|’. Examples of
patterns: :au[tocmd] [{event}] [{pat}] list those autocommands that
match given event-pattern combination. :au[tocmd]! [{event}] [{pat}] remove autocommands that match given event-pattern combination. Syntax is the same as for listing above. :apropos repeat last :apropos command. :bmark bookmark current directory with specified tags. :bmark! path tag1 [tag2 [tag3...]] same as :bmark, but allows bookmarking specific path instead of current directory. This is for use in vifmrc and for bookmarking files. Path can contain macros that expand to single path (%c, %C, %d, %D) or those that can expand to multiple paths, but contain only one (%f, %F, %rx). The latter is done for convenience on using the command interactively. Complex macros that include spaces (e.g. "%c:gs/ /_") should be escaped. :bmarks display all bookmarks in a menu. :bmarks [tag1 [tag2...]] display menu of bookmarks that include all of the specified tags. :bmgo when there are more than one match acts exactly like :bmarks, otherwise navigates to single match immediately (and fails if there is no match). :cabbrev display menu of command-line mode abbreviations. :ca[bbrev] lhs-prefix display command-line mode abbreviations which left-hand side starts with specified prefix. :ca[bbrev] lhs rhs register new or overwrites existing abbreviation for command-line mode. rhs can contain spaces and any special sequences accepted in rhs of mappings (see "Mappings" section below). Abbreviations are expanded non-recursively. :cnoreabbrev display menu of command-line mode abbreviations. :cnorea[bbrev] lhs-prefix display command-line mode abbreviations which left-hand side starts with specified prefix. :cnorea[bbrev] lhs rhs same as :cabbrev, but mappings in rhs are ignored during expansion. :cd change to home directory.
:cd ~/dir change directory to ~/dir. :cd /curr/dir /other/dir change directory of the current pane to /curr/dir and directory of the other pane to /other/dir. Relative paths are assumed to be relative to directory of current view. Command won’t fail if one of directories is invalid. All forms of the command accept macros. :cd! /dir same as :cd /dir /dir. :change create a menu window to alter a files properties. :chmod display file attributes (permission on *nix and properties on Windows) change dialog. :[range]chmod[!] arg... only for *nix :chown only for *nix :[range]chown [user][:][group] only for *nix :clone clones files in current directory. With "?" vifm will open vi to edit file names. "!" forces overwrite. Macros are expanded. :[range]clone[!] path clones files to directory specified with the path (absolute or relative to current directory). "!" forces overwrite. Macros are expanded. :[range]clone[!] name1 name2... clones files in current directory giving each next clone a corresponding name from the argument list. "!" forces overwrite. Macros are expanded. :colorscheme print current color scheme name on the status bar. :colo[rscheme] display a menu with a list of available color schemes. You can choose primary color scheme here. It is used for view if no directory specific colorscheme fits current path. It’s also used to set border color (except view titles) and colors in menus and dialogs. :colo[rscheme] color_scheme_name change primary color scheme to color_scheme_name. In case of errors (e.g. some colors are not supported by terminal) either nothing is changed or color scheme is reset to builtin colors to ensure that TUI is left in a usable state. :colo[rscheme] color_scheme_name directory associate directory with the color scheme. The directory argument can be either absolute or relative path when :colorscheme command is executed from command line, but mandatory should be an absolute path when the command is executed in scripts loaded at startup (until vifm is completely loaded). :comclear remove all user defined commands. :command display a menu of user commands. :com[mand] beginning display user defined commands that start with the beginning. :com[mand] name action set a new user command. :com[mand] name /pattern set search pattern. :com[mand] name =pattern set local filter value. :com[mand] name filter{:filter args} set file name filter (see :filter command description). For example: " display only audio files :command onlyaudio filter/.+.\(mp3|wav|mp3|flac|ogg|m4a|wma|ape\)$/i " display everything except audio files :command noaudio filter!/.+.\(mp3|wav|mp3|flac|ogg|m4a|wma|ape\)$/i :com[mand] cmd :commands set kind of an alias for
internal command (like in a shell). Passes range given to
alias to an aliased command, so running :%cp after :copy copy files to directory of other view. With "?" prompts for destination file names in an editor. "!" forces overwrite. :[range]co[py][!] path[ &] copy files to directory specified with the path (absolute or relative to directory of other view). "!" forces overwrite. :[range]co[py][!] name1 name2...[ &] copy files to directory of other view giving each next file a corresponding name from the argument list. "!" forces overwrite. :cquit same as :quit, but also aborts directory choosing via --choose-dir (empties output file) and returns non-zero exit code. :cunabbrev unregister command-line mode abbreviation by its lhs. :cuna[bbrev] rhs unregister command-line mode abbreviation by its rhs, so that abbreviation could be removed even after expansion. :delbmarks remove bookmarks from current directory. :delbmarks tag1 [tag2 [tag3...]] remove set of bookmarks that include all of the specified tags. :delbmarks! remove all bookmarks. :delbmarks! path1 [path2 [path3...]] remove bookmarks of listed paths. :delcommand remove user defined command named user_command. :delete delete selected file or files. "!" means complete removal (omitting trash). :[range]d[elete][!] [reg] [count][ &] delete selected or [count] files to the reg register. "!" means complete removal (omitting trash). :delmarks delete all marks. :delm[arks] marks ... delete specified marks, each argument is treated as a set of marks. :display display menu with registers content. :di[splay] list ... display the contents of the numbered and named registers that are mentioned in list (for example "az to display "", "a and "z content). :dirs
:echo evaluate each argument as an expression and output them separated with a space. See help on :let command for a definition of <expr>. :edit open selected or passed file(s) in editor. Macros and environment variables are expanded. :else execute commands until next matching :endif if all other conditions didn’t match. See also help on :if and :endif commands. :elseif execute commands until next matching :elseif, :else or :endif if conditions of previous :if and :elseif branches were evaluated to zero. See also help on :if and :endif commands. :empty
:endif end conditional block. See also help on :if and :else commands. :execute evaluate each argument as an expression and join results separated by a space to get a single string which is then executed as a command-line command. See help on :let command for a definition of <expr>. :exit same as :quit. :file display menu of programs set for the file type of the current file. " &" forces running associated program in background. :f[ile] arg[ &] run associated command that begins with the arg skipping opening menu. " &" forces running associated program in background. :filetype associate given program list to each of the patterns. Associated program (command) is used by handlers of l and Enter keys (and also in the :file menu). If you need to insert comma into command just double it (",,"). Space followed by an ampersand as two last characters of a command means running of the command in the background. Optional description can be given to each command to ease understanding of what command will do in the :file menu. Vifm will try the rest of the programs for an association when the default isn’t found. When program entry doesn’t contain any of vifm macros, name of current file is appended as if program entry ended with %c macro on *nix and %"c on Windows. On Windows path to executables containing spaces can (and should be for correct work with such paths) be double quoted. See "Patterns" section below for pattern definition. See also "Automatic FUSE mounts" section below. Example for zip archives and several actions: filetype *.zip,*.jar,*.war,*.ear
\ {Mount with fuse-zip}
\ FUSE_MOUNT|fuse-zip %SOURCE_FILE %DESTINATION_DIR,
\ {View contents}
\ zip -sf %c | less,
\ {Extract here}
\ tar -xf %c,
:filet[ype] filename list (in menu mode) currently registered patterns that match specified file name. Same as ":filextype filename". :filextype same as :filetype, but this command is ignored if not running in X. In X :filextype is equal to :filetype. See "Patterns" section below for pattern definition. See also "Automatic FUSE mounts" section below. For example, consider the following settings (the order might seem strange, but it’s for the demonstration purpose): filetype *.html,*.htm
\ {View in lynx}
\ lynx
filextype *.html,*.htm
\ {Open with dwb}
\ dwb %f %i &,
filetype *.html,*.htm
\ {View in links}
\ links
filextype *.html,*.htm
\ {Open with firefox}
\ firefox %f &,
\ {Open with uzbl}
\ uzbl-browser %f %i &,
If you’re using vifm inside a terminal emulator that is running in graphical environment (when X is used on *nix; always on Windows), vifm attempts to run application in this order: 1. lynx If there is no graphical environment (checked presence of $DISPLAY environment variable on *nix; never happens on Windows), the list will look like: 1. lynx Just as if all :filextype commands were not there. The purpose of such differentiation is to allow comfortable use of vifm with same settings in desktop environment/through remote connection (SSH)/in native console. :filext[ype] filename list (in menu mode) currently registered patterns that match specified file name. Same as ":filetype filename". :fileviewer register specified list of commands as viewers for each of the patterns. Viewer is a command which output is captured and displayed in one of the panes of vifm after pressing "e" or running :view command. When the command doesn’t contain any of vifm macros, name of current file is appended as if command ended with %c macro. Comma escaping and missing commands processing rules as for :filetype apply to this command. See "Patterns" section below for pattern definition. Example for zip archives: fileviewer *.zip,*.jar,*.war,*.ear zip -sf %c, echo "No zip to preview:" :filev[iewer] filename list (in menu mode) currently registered patterns that match specified filename. :filter will filter all the files out of the directory listing that match the regular expression. Using second variant you can use the bar (’|’) symbol without escaping. Empty regular expression (specified by //, "" or ’’) means using of the last search pattern. Use ’!’ to control state of filter inversion after updating filter value (also see ’cpoptions’ description). Filter is matched case sensitively on *nix and case insensitively on Windows. Supported
flags: Flags might be repeated multiple times, later ones win (e.g. "iiiI" is equivalent to "I" and "IiIi" is the same as "i"). " filter all files ending in .o from the filelist. :filter /.o$/ Note: vifm uses extended regular expressions. :filter reset filter (set it to empty string) and show all files. :filter! same as :invert. :filter? show information on local, name and auto filters. :find display results of find command in the menu. Searches among selected files if any. Accepts macros. By default the command relies on the external "find" utility, which can be customized by altering value of the ’findprg’ option. :[range]fin[d] -opt... same as :find above, but user defines all find arguments. Searches among selected files if any. :[range]fin[d] path -opt... same as :find above, but user defines all find arguments. Ignores selection and range. :[range]fin[d] repeat last :find command. :finish stop sourcing a script. Can only be used in a vifm script file. This is a quick way to skip the rest of the file. :grep will show results of grep command in the menu. Add "!" to request inversion of search (look for lines that do not match pattern). Searches among selected files if any and no range given. Ignores binary files by default. By default the command relies on the external "grep" utility, which can be customized by altering value of the ’grepprg’ option. :[range]gr[ep][!] -opt... same as :grep above, but user defines all grep arguments, which are not escaped. Searches among selected files if any. :[range]gr[ep][!] repeats last :grep command. "!" of this command inverts "!" in repeated command. :help show the help file. :h[elp] argument is the same as using ’:h argument’ in vim. Use vifm-<something> to get help on vifm (tab completion works). This form of the command doesn’t work when 'vimhelp' option is off. :highlight will show information about all highlight groups in the current directory. :hi[ghlight] clear will reset all highlighting to builtin defaults. :hi[ghlight] ( group-name | {pat1,pat2,...} | /regexp/ ) will show information on given highlight group or file name pattern of color scheme used in the active view. :hi[ghlight] (
group-name | {pat1,pat2,...} | /regexp/[iI] ) sets style (cterm), foreground (ctermfg) or/and background (ctermbg) parameters of highlight group or file name pattern for color scheme used in the active view. All style values as well as color names are case insensitive. Available style
values (some of them can be combined): Available
group-name values: Available
colors: Light versions of colors are regular colors with bold attribute set. So order of arguments of :highlight command is important and it’s better to put "cterm" in front of others to prevent it from overwriting attributes set by "ctermfg" or "ctermbg" arguments. For convenience of color scheme authors xterm-like names for 256 color palette is also supported. The mapping is taken from http://vim.wikia.com/wiki/Xterm256_color_names_for_console_Vim Duplicated entries were altered by adding an underscore followed by numerical suffix. 0 Black 86
Aquamarine1 172 Orange3 There are two colors (foreground and background) and only one bold attribute. Thus single bold attribute affects both colors when "reverse" attribute is used in vifm run inside terminal emulator. At the same time linux native console can handle boldness of foreground and background colors independently, but for consistency with terminal emulators this is available only implicitly by using light versions of colors. This behaviour might be changed in the future. Although vifm supports 256 colors in a sense they are supported by UI drawing library, whether you will be able to use all of them highly depends on your terminal. To set up terminal properly, make sure that $TERM in the environment you run vifm is set to name of 256-color terminal (on *nixes it can also be set via X resources), e.g. xterm-256color. One can find list of available terminal names by listing /usr/lib/terminfo/. Number of colors supported by terminal with current settings can be checked via "tput colors" command. Here is the
hierarchy of highlight groups, which you need to know for
using transparency: "none" means default terminal color for highlight groups at the first level of the hierarchy and transparency for all others. Here file name
specific highlights mean those configured via globs ({}) or
regular expressions (//). At most one of them is applied per
file entry, namely the first that matches file name, hence
order of :highlight commands might be important in certain
cases. creates a pop-up menu of directories visited. :his[tory] x x can be: :if starts conditional block. Commands are executed until next matching :elseif, :else or :endif command if {expr1} evaluates to non-zero, otherwise they are ignored. See also help on :else and :endif commands. Example: if $TERM == ’screen.linux’
highlight CurrLine ctermfg=lightwhite ctermbg=lightblack
elseif $TERM == ’tmux’
highlight CurrLine cterm=reverse ctermfg=black ctermbg=white
else
highlight CurrLine cterm=bold,reverse ctermfg=black ctermbg=white
endif
:invert invert file name filter. :invert? [f] show current filter state. :invert s invert selection. :invert o invert sorting order of the primary sorting key. :invert? o show sorting order of the primary sorting key. :jobs
:let sets environment variable. Warning: setting environment variable to an empty string on Windows removes it. :let $ENV_VAR .= <expr> append value to environment variable. :let &[l:|g:]opt = <expr> sets option value. :let &[l:|g:]opt .= <expr> append value to string option. :let &[l:|g:]opt += <expr> increasing option value, adding sub-values. :let &[l:|g:]opt -= <expr> decreasing option value, removing sub-values. Where <expr> could be a
single-quoted string, double-quoted string, an use "locate" command to create a menu of filenames. Selecting a file from the menu will reload the current file list in vifm to show the selected file. By default the command relies on the external "locate" utility (it’s assumed that its database is already built), which can be customized by altering value of the ’locateprg’ option. :locate repeats last :locate command. :ls
:lstrash displays a menu with list of files in trash. Each element of the list is original path of a deleted file, thus the list can contain duplicates. :mark Set mark x (a-zA-Z0-9) at /full/path and filename. By default current directory is being used. If no filename was given and /full/path is current directory then last file in [range] is used. Using of macros is allowed. Question mark will stop command from overwriting existing marks. :marks
:marks list ... display the contents of the marks that are mentioned in list. :messages shows previously given messages (up to 50). :mkdir creates directories with given names. "!" means make parent directories as needed. Macros are expanded. :move move files to directory of other view. With "?" prompts for destination file names in an editor. "!" forces overwrite. :[range]m[ove][!] path[ &] move files to directory specified with the path (absolute or relative to directory of other view). "!" forces overwrite. :[range]m[ove][!] name1 name2...[ &] move files to directory of other view giving each next file a corresponding name from the argument list. "!" forces overwrite. :nohlsearch clear selection in current pane. :normal execute normal mode commands. If "!" is used, user defined mappings are ignored. Unfinished last command is aborted as if <esc> or <c-c> was typed. A ":" should be completed as well. Commands can’t start with a space, so put a count of 1 (one) before it. :only switch to a one window view. :popd
:pushd add pane directories to stack and process arguments like :cd command.
:put puts files from specified register (" by default) into current directory. "!" moves files from their original location instead of copying them. During this operation no confirmation dialogs will be shown, all checks are performed beforehand. :pwd
:quit exit vifm (add ! to skip saving changes and checking for active backgrounded commands). :redraw redraw the screen immediately. :registers display menu with registers content. :reg[isters] list ... display the contents of the numbered and named registers that are mentioned in list (for example "az to display "", "a and "z content). :rename rename files using vi to edit names. ! means go recursively through directories. :[range]rename name1 name2... rename each of selected files to a corresponding name. :restart free a lot of things (histories, commands, etc.), reread vifminfo and vifmrc files and run startup commands passed in the argument list, thus losing all unsaved changes (e.g. recent history or keys mapped in current session). :restore restore file from trash directory, doesn’t work outside one of trash directories. See "Trash directory" section below. :rlink create relative symbolic links to files in directory of other view. With "?" prompts for destination file names in an editor. "!" forces overwrite. :[range]rlink[!] path create relative symbolic links of files in directory specified with the path (absolute or relative to directory of other view). "!" forces overwrite. :[range]rlink[!] name1 name2... create relative symbolic links of files in directory of other view giving each next link a corresponding name from the argument list. "!" forces overwrite. :screen toggle whether to use the
terminal multiplexer or not. :screen? display whether integration with terminal multiplexers is enabled. Note: the
command is called screen for historical reasons (when tmux
wasn’t yet supported) and might be changed in future
releases, or get an alias. select files in the given range (current file if no range is given). :select {pattern} select files that match specified pattern. Possible {pattern} forms are described in "Patterns" section below. Trailing slash for directories is taken into account, so ’:select! */ | invert s’ selects only files. :select //[iI] same as item above, but reuses last search pattern. :select !{external command} select files from the list supplied by external command. Files are matched by full paths, relative paths are converted to absolute ones beforehand. :[range]select! [{pattern}] same as above, but resets previously selected items before proceeding. :set
:se[t] all display all options. :se[t] opt1=val1 opt2=’val2’ opt3="val3" ... sets given options. For local
options both values are set. the meaning:
Option name can be prepended and appended by any number of whitespace characters. :setglobal display all global options that differ from their default value. :setg[lobal] all display all global options. :setg[lobal] opt1=val1 opt2=’val2’ opt3="val3" ... same as :set, but changes/prints only global options or global values of local options. Changes to the latter might be not visible until directory is changed. :setlocal display all local options that differ from their default value. :setl[ocal] all display all local options. :setl[ocal] opt1=val1 opt2=’val2’ opt3="val3" ... same as :set, but changes/prints only local values of local options. :shell start a shell in current directory. "!" suppresses spawning dedicated window of terminal multiplexer for a shell. To make vifm adaptive to environment it uses $SHELL if it’s defined, otherwise ’shell’ value is used. :sort display dialog with different sorting methods, when one can select primary sorting key. When ’viewcolumns’ options is empty and ’lsview’ is off, changing primary sorting key will also affect view look (in particular the second column of the view will be changed). :source read command-line commands from the file. :split switch to a two window horizontal view. :sp[lit]! toggle horizontal window splitting. :sp[lit] path splits the window horizontally to show both file directories. Also changes other pane to path (absolute or relative to current directory of active pane). :substitute for each file in range replace a match of pattern with string. String can contain \0...\9 to link to capture groups (\0 - all match, \1 - first group, etc.). Pattern is stored in search history. Available flags:
:[range]s[ubstitute]/pattern substitute pattern with an empty string. :[range]s[ubstitute]//string/[flags] use last pattern from search history. :[range]s[ubstitute] repeat previous substitution command. :sync change the other pane to the current pane directory or to some path relative to the current directory. Using macros is allowed.
:sync! [location | cursorpos | localopts | filters | filelist | all]... change enumerated properties of the other pane to match corresponding properties of the current pane. Arguments have the following meanings:
:touch create file(s). Aborts on errors. Doesn’t update time of existing files. Macros are expanded. :tr for each file in range transliterate the characters which appear in pattern to the corresponding character in string. When string is shorter than pattern, it’s padded with its last character. :trashes lists all valid trash directories in a menu. Only non-empty and writable trash directories are shown. This is exactly the list of directories that are cleared when :empty command is executed. :trashes? same as :trashes, but also displays size of each trash directory. :undolist display list of latest changes. Use "!" to see actual commands. :unlet remove environment variables. Add ! to omit displaying of warnings about nonexistent variables. :unselect unselect files in the given range (current file if no range is given). :unselect {pattern} unselect files that match specified pattern. Possible {pattern} forms are described in "Patterns" section below. Trailing slash for directories is taken into account, so ’:unselect */’ unselects directories. :unselect !{external command} unselect files from the list supplied by external command. Files are matched by full paths, relative paths are converted to absolute ones beforehand. :unselect //[iI] same as item above, but reuses last search pattern. :version show menu with version information. :vifm
:view toggle on and off the quick file view. :vie[w]! turn on quick file view if it’s off. :volumes only for MS-Windows :vsplit switch to a two window vertical view. :vs[plit]! toggle window vertical splitting. :vs[plit] path split the window vertically to show both file directories. And changes other pane to path (absolute or relative to current directory of active pane). :wincmd same as running Ctrl-W [count] {arg}. :windo execute command for each pane (same as :winrun % command). :winrun execute command for pane(s),
which is determined by type argument: :write write vifminfo file. :wq
:xit will exit Vifm (add ! if you don’t want to save changes). :yank will yank files to the reg register. :map lhs rhs map lhs key sequence to rhs in normal and visual modes. :map! lhs rhs map lhs key sequence to rhs in command line mode. :cm[ap] lhs rhs map lhs to rhs in command line mode. :mm[ap] lhs rhs map lhs to rhs in menu mode. :nm[ap] lhs rhs map lhs to rhs in normal mode. :qm[ap] lhs rhs map lhs to rhs in view mode. :vm[ap] lhs rhs map lhs to rhs in visual mode. :map list all maps in command line mode. :mm[ap] list all maps in menu mode. :nm[ap] list all maps in normal mode. :qm[ap] list all maps in view mode. :vm[ap] list all maps in visual mode. :map beginning list all maps in command line mode that start with the beginning. :mm[ap] beginning list all maps in menu mode that start with the beginning. :nm[ap] beginning list all maps in normal mode that start with the beginning. :qm[ap] beginning list all maps in view mode that start with the beginning. :vm[ap] beginning list all maps in visual mode that start with the beginning. :noremap map the key sequence lhs to {rhs} for normal and visual modes, but disallow mapping of rhs. :no[remap]! lhs rhs map the key sequence lhs to {rhs} for command line mode, but disallow mapping of rhs. :cno[remap] lhs rhs map the key sequence lhs to {rhs} for command line mode, but disallow mapping of rhs. :mn[oremap] lhs rhs map the key sequence lhs to {rhs} for menu mode, but disallow mapping of rhs. :nn[oremap] lhs rhs map the key sequence lhs to {rhs} for normal mode, but disallow mapping of rhs. :qn[oremap] lhs rhs map the key sequence lhs to {rhs} for view mode, but disallow mapping of rhs. :vn[oremap] lhs rhs map the key sequence lhs to {rhs} for visual mode, but disallow mapping of rhs. :unmap remove the mapping of lhs from normal and visual modes. :unm[ap]! lhs remove the mapping of lhs from command line mode. :cu[nmap] lhs remove the mapping of lhs from command line mode. :mu[nmap] lhs remove the mapping of lhs from menu mode. :nun[map] lhs remove the mapping of lhs from normal mode. :qun[map] lhs remove the mapping of lhs from view mode. :vu[nmap] lhs remove the mapping of lhs from visual mode. RangesThe ranges
implemented include: Examples: :%delete would delete all files in the directory. :2,4delete would delete the files in the list positions 2 through 4. :.,$delete would delete the files from the current position to the end of the filelist. :3delete4 would delete the files in the list positions 3, 4, 5, 6. If a backward range is given :4,2delete - an query message is given and user can chose what to do next. The builtin commands that accept a range are :d[elete] and :y[ank]. Command macrosThe command macros may be used in user commands.
%rx %"rx Full paths to files in the register {x}. In case of invalid symbol in place of {x}, it’s processed with the rest of the line and default register is used.
The following dimensions and coordinates are in characters:
Use %% if you need to put a percent sign in your command. Note that %m, %M, %s, %S, %i, %u and %U macros are mutually exclusive. Only the last one of them on the command will take effect. You can use file name modifiers after %c, %C, %f, %F, %b, %d and %D macros. Supported modifiers are:
See ’:h filename-modifiers’ in Vim’s documentation for the detailed description. Using %x means expand corresponding macro escaping all characters that have special meaning. And %"x means using of double quotes and escape only backslash and double quote characters, which is more useful on Windows systems. Position and quantity (if there is any) of %m, %M, %S or %s macros in the command is unimportant. All their occurrences are removed from the resulting command. %c and %f
macros are expanded to file names only, when %C and %F are
expanded to full paths. %f and %F follow this in %b too.
set the :move command to move all of the files selected in the current directory to the other directory. The %a macro is replaced with
any arguments given to an alias command. :com lsl !!ls -l %a - set the lsl command to execute ls -l with or without an argument. :lsl<Enter> will list the directory contents of the current directory. :lsl filename<Enter> will list only the given filename. The macros can also be used in
directly executing commands. ":!mv %f
You don’t want to run
terminal commands, which require terminal input %m, %M, %s, %S, %u and %U macros cannot be combined with background mark (" &") as it doesn’t make much sense. Command backgroundingCopy and move operation can take a lot of time to proceed. That’s why vifm supports backgrounding of this two operations. To run :copy, :move or :delete command in the background just add " &" at the end of a command. For each background operation a new thread is created. Currently job cannot be stopped or paused. You can see if command is still running in the :jobs menu. Backgrounded commands have progress instead of process id at the line beginning. Background operations cannot be undone. CancellationNote that cancellation works somewhat different on Windows platform due to different mechanism of break signal propagation. One also might need to use Ctrl-Break shortcut instead of Ctrl-C. There are two types of operations that can be cancelled:
Note that vifm never terminates applications, it sends SIGINT signal and lets the application quit normally. When one of set of operations is cancelled (e.g. copying of 5th file of 10 files), further operations are cancelled too. In this case undo history will contain only actually performed operations. Cancelled operations are indicated by "(cancelled)" suffix appended to information message on statusbar. File system operations Currently the following commands can be cancelled: :alink, :chmod, :chown, :clone, :copy, :delete, :mkdir, :move, :restore, :rlink, :touch. File putting (on p/P key) can be cancelled as well. It’s not hard to see that these are mainly long-running operations. Cancelling commands when they are repeated for undo/redo operations is allowed for convenience, but is not recommended as further undo/redo operations might get blocked by side-effects of partially cancelled group of operations. These commands can’t be cancelled: :empty, :rename, :substitute, :tr. Mounting with FUSE It’s not considered to be an error, so only notification on the status bar is shown. External application calls Each of this operations can be cancelled: :apropos, :find, :grep, :locate. Patterns:highlight, :filetype, :filextype, :fileviewer commands and ’classify’ option support globs, regular expressions and mime types to match file names or their paths. There are six possible ways to write a single pattern:
To combine several patterns (AND them), make sure you’re using of the first five forms and write patterns one after another, like this: <text/plain>{*.vifm}
Mind that if you make a mistake the whole string will be treated as the sixth form. :filetype, :filextype and :fileviewer commands accept comma-separated list of patterns instead of a single pattern, thus effectively handling OR operation on them: <text/plain>{*.vifm},<application/pdf>{*.pdf}
Five first forms can include leading exclamation mark that negates pattern matching. The last form is implicitly refers to one of others. :highlight does not accept undecorated form, while :filetype, :filextype, :fileviewer and ’classify’ treat it as list of name globs. Regular expression patterns are case insensitive by default. "Globs" section below provides short overview of globs and some important points that one needs to know about them. Mime type matching is essentially globs matching applied to mime type of a file instead of its name/path. Note: mime types aren’t detected on Windows. GlobsGlobs are always case insensitive as it makes sense in general case. *, ?, [ and ] are treated as special symbols in the pattern. E.g. :filetype * less %c matches all files. One can use character classes for escaping, so :filetype [*] less %c matches only one file name, the one which contains only asterisk symbol. * means any number of any characters (possibly an empty substring), with one exception: asterisk at the pattern beginning doesn’t match dot in the first position. E.g. :fileviewer *.zip,*.jar zip -sf %c associates using of zip program to preview all files with zip or jar extensions as listing of their content. ? means any character at this position. E.g. :fileviewer ?.out file %c calls file tool for all files which has exactly one character before their extension (e.g. a.out, b.out). Square brackets designate character class, which means that whole character class matches against any of characters listed in it. For example :fileviewer *.[ch] highlight -O xterm256 -s dante --syntax c %c makes vifm call highlight program to colorize source and header files in C language for a 256-color terminal. Equal command would be :fileviewer *.c,*.h highlight -O xterm256 -s dante --syntax c %c Inside square brackets ^ or ! can be used for symbol class negotiation and the - symbol to set a range. ^ and ! should appear right after the opening square bracket. For example :filetype *.[!d]/ inspect_dir associates inspect_dir as additional handler for all directories that have one character extension unless it’s "d" letter. And :filetype [0-9].jpg sxiv associates sxiv picture viewer only for JPEG-files that contain single digit in their name. :set optionsLocal options These are kind of options that are local to a specific view. So you can set ascending sorting order for left pane and descending order for right pane. In addition to being local to views, each such option also has two values:
The idea is that current directory can be made a temporary exception to regular configuration of the view, until directory change. Use :setlocal for that. :setglobal changes view value not affecting settings until directory change. :set applies changes immediately to all values. ’aproposprg’ type: string ’autochpos’ type: boolean ’columns’ ’co’ type: integer ’cdpath’ ’cd’ type: string list This option doesn’t affect completion of :cd command. Example: set cdpath=~ This way ":cd bin" will switch to "~/bin" even if directory named "bin" exists in current directory, while ":cd ./bin" command will ignore value of ’cdpath’. ’chaselinks’ type: boolean ’classify’ type: string list Priority rules:
Either {prefix} or {suffix} or both can be omitted (which is the default for all unspecified file types), this means empty {prefix} and/or {suffix}. {prefix} and {suffix} should consist of at most eight characters. Elements are separated by commas. Neither prefixes nor suffixes are part of file names, so they don’t affect commands which operate on file names in any way. Comma (’,’) character can be inserted by doubling it. List of file type names can be found in the description of filetype() function. ’confirm’ ’cf’ type: set ’cpoptions’ ’cpo’ type: charset ’cvoptions’ type: set ’deleteprg’ type: string ’dirsize’ type: enumeration Size obtained via ga/gA overwrites this setting so seeing count of files and occasionally size of directories is possible. ’dotdirs’ type: set Note that empty directories always contain "../" entry regardless of value of this option. "../" disappears at the moment at least one file is created. ’fastrun’ type: boolean ’fillchars’ ’fcs’ type: string list If value is omitted, its default value is used. Example: set fillchars=vborder:. ’findprg’ type: string The macros can slightly change their meaning depending on :find command arguments. When the first argument points to an existing directory, %s is assigned all arguments and %a/%A are left empty. Otherwise, %s is assigned a dot (".") meaning current directory or list of selected file names, if any. %a/%A are assigned arguments when first argument starts with a dash ("-"), otherwise %a gets an escaped version of arguments, prepended by "-name" (on *nix) or "-iname" (on Windows) predicate. %a and %A macros contain almost the same value, the difference is that %a can be escaped and %A is never escaped. %A is to be used mainly on Windows, where shell escaping is a mess and can break command execution. Optional %u or %U macro could be used (if both specified %U is chosen) to force redirection to custom or unsorted custom view respectively. Starting from Windows Server 2003 a where command is available, one can configure vifm to use it in the following way: set findprg="where /R %s %A" As the syntax of this command is rather limited, one can’t use :find command with selection of more than one item in this case. The command looks for files only completely ignoring directories. When using find port on Windows, another option is to setup ’findprg’ like this: set findprg="find %s %a" ’followlinks’ type: boolean ’fusehome’ type: string If you change this option, vifm won’t remount anything. It affects future mounts only. See "Automatic FUSE mounts" section below for more information. ’gdefault’ ’gd’ type: boolean ’grepprg’ type: string Optional %u or %U macro could be used (if both specified %U is chosen) to force redirection to custom or unsorted custom view respectively. See ’findprg’ option for description of difference between %a and %A. Example of setup to use ack (http://beyondgrep.com/) instead of grep: set grepprg=ack\ -H\ -r\ %i\ %a\ %s or The Silver Searcher (https://github.com/ggreer/the_silver_searcher): set grepprg=ag\ --line-numbers\ %i\ %a\ %s ’history’ ’hi’ type: integer ’hlsearch’ ’hls’ type: boolean
default: false ’ignorecase’ ’ic’ type: boolean ’incsearch’ ’is’ type: boolean ’iooptions’ type: set ’laststatus’ ’ls’ type: boolean ’lines’ type: integer ’locateprg’ type: string Optional %u or %U macro could be used (if both specified %U is chosen) to force redirection to custom or unsorted custom view respectively. ’mintimeoutlen’ type: integer ’lsview’ type: boolean ’number’ ’nu’ type: boolean ’numberwidth’ ’nuw’ type: integer ’relativenumber’ ’rnu’ type: boolean nonumber number norelativenumber
| first | 1 first relativenumber
| 1 first | 1 first ’rulerformat’ ’ruf’ type: string Percent sign can be followed by optional minimum field width. Add ’-’ before minimum field width if you want field to be right aligned. Note ambiguity with number of filtered out files, which can be resolved with the help of width field ("%0-"). Example: set rulerformat=’%2l-%S%[ +%0-%]’ ’runexec’ type: boolean ’scrollbind’ ’scb’ type: boolean ’scrolloff’ ’so’ type: integer ’shell’ ’sh’ type: string ’shortmess’ ’shm’ type: charset ’slowfs’ type: string list Example for autofs root /mnt/autofs: set slowfs+=/mnt/autofs ’smartcase’ ’scs’ type: boolean
default: +name on *nix and
+iname on Windows Note: look for st_atime, st_ctime and st_mtime in "man 2 stat" for more information on time keys. '+' means ascending sort for this key, and ’-’ means descending sort. "dir" key is somewhat similar in this regard but it’s added implicitly: when "dir" is not specified, sorting behaves as if it was the first key in the list. That’s why if one wants sorting algorithm to mix directories and files, "dir" should be appended to sorting option, for example like this: set sort+=dir or set sort=-size,dir Value of the option is checked to include dir key and default sorting key (name on *nix, iname on Windows). Here is what happens if one of them is missing:
all other keys are left untouched (at most they are moved). This option also changes view columns according to primary sorting key set, unless ’viewcolumns’ option is not empty. ’sortnumbers’ type: boolean ’sortgroups’ type: string Example: set sortgroups=-(done|todo).* this would put files with "-done" in their names above all files with "-todo". ’sortorder’ type: enumeration ’statusline’ ’stl’ type: string
Percent sign can be followed by optional minimum field width. Add ’-’ before minimum field width if you want field to be right aligned. Example: set statusline=" %t%= %A %10u:%-7g %15s %20d " On Windows file
properties include next flags (upper case means flag is on):
’suggestoptions’ type: string list ’syscalls’ type: boolean ’tabstop’ ’ts’ type: integer ’timefmt’ type: string ’timeoutlen’ ’tm’ type: integer ’title’ type: boolean ’trash’ type: boolean ’trashdir’ type: string On *nix, if
element ends with "%u", the mark is replaced with
real user ID and permissions are set so that only that only
owner is able to use it. When new file gets cut (deleted) vifm traverses each element of the option in the order of their appearance and uses first trash directory that it was able to create or that is already writable. Default value tries to use trash directory per mount point and falls back to ~/.vifm/Trash on failure. Will attempt to create the directory if it does not exist. See "Trash directory" section below. ’tuioptions’ ’to’ type: charset ’undolevels’ ’ul’ type: integer ’vicmd’ type: string ’viewcolumns’ type: string An example of setting the options for both panes (note :windo command): windo set viewcolumns=-{name}..,6{size},11{perms}
’vixcmd’ type: string ’vifminfo’ type: set bmarks -
named bookmarks ’vimhelp’ type: boolean ’wildmenu’ ’wmnu’ type: boolean ’wildstyle’ type: enumeration ’wordchars’ type: string list The option affects Alt-D, Alt-B and Alt-F, but not Ctrl-W. This is intentionally to allow two use cases: - Moving
by WORDS and deletion by words. To get the latter use the following mapping: cnoremap <c-w> <a-b><a-d> Also used for abbreviations.
default: true ’wrapscan’ ’ws’ type: boolean MappingsSince it’s not easy to enter special characters there are several special sequences that can be used in place of them. They are:
<space> Space key.
<tab> <s-tab> Tabulation and Shift+Tabulation keys. <home> <end> Home/End. <left> <right> <up> <down> Arrow keys. <pageup> <pagedown> PageUp/PageDown. <del> <delete> Delete key. <del> and <delete> mean different codes, but <delete> is more common. <c-a>,<c-b>,...,<c-z>,<c-[>,<c->,<c-]>,<c-^>,<c-_> Control + some key (see key conflict description below). <a-a>,<a-b>,...,<a-z> <m-a>,<m-b>,...,<m-z> Alt + some key. <a-c-a>,<a-c-b>,...,<a-c-z> <m-c-a>,<m-c-b>,...,<m-c-z>
only for *nix <f0> - <f63> Functional keys. <c-f1> - <c-f12> only for MS-Windows <a-f1> - <a-f12> only for MS-Windows <s-f1> - <s-f12> only for MS-Windows Note that due to the way terminals process their input, several keyboard keys might be mapped to single key code, for example:
Most of the time they are defined consistenly and don’t cause surprises, but <c-h> and <bs> are treated differently in different environments (although they match each other all the time), that’s why they correspond to different keys in vifm. As a consequence, if you map <c-h> or <bs> be sure to map the other one to the same combination so that the mapping will work in all environments. vifm removes whitespace characters at the beginning and end of commands. That’s why you may want to use <space> at the end of rhs in mappings. For example: cmap <f1> man<space> will put "man " in line when you hit the <f1> key in the command line mode. Expression syntaxSupported expressions is a subset of what VimL provides. Expression syntax summary, from least to most significant: expr1 expr2 || expr2 .. logical OR expr2 expr3 && expr3 .. logical AND expr3 expr4 ==
expr4 equal expr4 expr5 . expr5 .. string concatenation expr5 -
expr5 unary minus expr6 number
number constant ".." indicates that the operations in this level can be concatenated. expr1 Arguments are converted to numbers before evaluation. Result is non-zero if at least one of arguments is non-zero. It’s right associative and with short-circuiting, so sub-expressions are evaluated from left to right until result of whole expression is determined (i.e., until first non-zero) or end of the expression. expr2 Arguments are converted to numbers before evaluation. Result is non-zero only if both arguments are non-zero. It’s right associative and with short-circuiting, so sub-expressions are evaluated from left to right until result of whole expression is determined (i.e., until first zero) or end of the expression. expr3 Compare two expr4 expressions, resulting in a 0 if it evaluates to false or 1 if it evaluates to true. equal == Examples: ’a’ == ’a’ == 1 ’a’ > ’b’ == 1 ’a’ == ’b’ == 0 ’2’ > ’b’ == 0 2 > ’b’ == 1 2 > ’1b’ == 1 2 > ’9b’ == 0 -1 == -’1’ == 1 0 == ’--1’ == 1 expr4 Examples: ’a’ . ’b’ == ’ab’ ’aaa’ . ’’ . ’c’ == ’aaac’ expr5 - expr5
unary minus For
’-’ the sign of the number is changed.
A String will be converted to a Number first. These operations can be repeated and mixed. Examples: --9 == 9 ---9 == -9 -+9 == 9 !-9 == 0 !’’ == 1 !’x’ == 0 !!9 == 1 expr6 number number
constant Decimal number. Examples: 0 == 0 0000 == 0 01 == 1 123 == 123 10000 == 10000 string Note that double quotes are used. A string
constant accepts these special characters: Examples: "\"Hello,\tWorld!\"" "Hi,\nthere!" literal-string
Note that single quotes are used. This string is taken as it is. No backslashes are removed or have a special meaning. The only exception is that two quotes stand for one quote. Examples: ’All\slashes\are\saved.’ ’This string contains doubled single quotes ’’here’’’ option Examples: echo ’Terminal size: ’.&columns.’x’.&lines if &columns > 100 Any valid option name can be used here (note that "all" in ":set all" is a pseudo option). See ":set options" section above. environment
variable The String value of any environment variable. When it is not defined, the result is an empty string. Examples: ’This is my $PATH env: ’ . $PATH ’vifmrc at ’ . $MYVIFMRC . ’ is used.’ function call
See "Functions" section below. Examples: "’" . filetype(’.’) . "’" filetype(’.’) == ’reg’ FunctionsUSAGE RESULT DESCRIPTION chooseopt({opt})
String Queries choose parameters passed on startup. chooseopt({opt}) Retrieves
values of options related to file choosing. {opt} can be one
of: executable({expr}) If {expr} is absolute or relative path, checks whether path destination exists and refers to an executable, otherwise checks whether command named {expr} is present in directories listed in $PATH. Checks for various executable extensions on Windows. Returns boolean value describing result of the check. Example: " use custom default viewer script if it’s available and installed
" in predefined system directory, otherwise try to find it elsewhere
if executable(’/usr/local/bin/defviewer’)
fileview * /usr/local/bin/defviewer %c
else
if executable(’defviewer’)
fileview * defviewer %c
endif
endif
expand({expr}) Expands environment variables and macros in {expr} just like it’s done for command-line commands. Returns a string. See "Command macros" section above. Examples: " percent sign :echo expand(’%%’) " the last part of directory name of the other pane :echo expand(’%D:t’) " $PATH environment variable (same as ’:echo $PATH’) :echo expand(’$PATH’) filetype({fnum}) The result is a
string, which represents file type and is one of the list:
Parameter
{fnum} can have following values: getpanetype() Retrieves
string describing type of current pane. Possible return
values: has({property}) Allows
examining internal parameters from scripts to e.g. figure
out environment in which application is running. Returns 1
if property is true/present, otherwise 0 is returned.
Currently the following properties are supported (anything
else will yield 0): Usage example: " skip user/group on Windows
if !has(’win’)
let $RIGHTS = ’%10u:%-7g ’
endif
execute ’set’ ’statusline=" %t%= %A ’.$RIGHTS.’%15E %20d "’
layoutis({type}) Checks whether
current interface layout is {type} or not, where {type} can
be: Usage example: " automatically split vertically before enabling preview :nnoremap w :if layoutis(’only’) | vsplit | endif | view<cr> paneisat({loc}) Checks whether
position of active pane in current layout matches one of the
following locations: system({command}) Runs the command in shell and returns its output (joined standard output and standard error streams). All trailing newline characters are stripped to allow easy appending to command output. Ctrl-C should interrupt the command. Usage example: " command to enter .git/ directory of git-repository (when ran inside one) command! cdgit :execute ’cd’ system(’git rev-parse --git-dir’) Menus and dialogsWhen navigating to some path from a menu there is a difference in end location depending on whether path has trailing slash or not. Files normally don’t have trailing slashes so "file/" won’t work and one can only navigate to a file anyway. On the other hand with directories there are two options: navigate to a directory or inside of it. To allow both use cases, the first one is used on paths like "dir" and the second one for "dir/". Commands :range
navigate to a menu line. leave menu mode. :noh[lsearch] reset search match highlighting. :w[rite] {dest} write all menu lines into file specified by {dest}. General j, Ctrl-N
- move down. Escape, Ctrl-C, ZZ, ZQ, q - quit. In all menus The following set of keys has the same meaning as in normal mode. Ctrl-B, Ctrl-F
zh -
scroll menu items [count] characters to the right. : - enter command line mode for menus (currently only :exi[t], :q[uit], :x[it] and :{range} are supported). b -
interpret content of the menu as list of paths and use it to
create custom view in place of previously active pane. See
"Custom views" section below. v - load menu content into quickfix list of the editor (Vim compatible by assumption) or if list doesn’t have separators after file names (colons) open each line as a file name. Below is description of additional commands and reaction on selection in some menus and dialogs. Apropos menu Selecting menu item run man on a given topic. Menu won’t be closed automatically to allow view several pages one by one. Command-line mode abbreviations menu Type dd on an abbreviation to remove it. c leaves menu preserving file selection and inserts right-hand side of selected command into command-line. Color scheme menu Selecting name of a color scheme applies it the same way as if ":colorscheme <name>" was executed on the command-line. Commands menu Selecting command executes it with empty arguments (%a). dd on a command to remove. Marks menu Selecting mark navigates to it. dd on a mark to remove it. Bookmarks menu Selecting a bookmark navigates to it. Type dd on a bookmark to remove it. gf and e also work to make it more convenient to bookmark files. Trash (:lstrash) menu r on a file name to restore it from trash. dd deletes file under the cursor. Trashes menu dd empties selected trash in background. Directory history and Trashes menus Selecting directory name will change directory of the current view as if :cd command was used. Directory stack menu Selecting directory name will rotate stack to put selected directory pair at the top of the stack. Filetype menu Commands from vifmrc or typed in command-line are displayed above empty line. All commands below empty line are from .desktop files. c leaves menu preserving file selection and inserts command after :! in command-line mode. Grep, find, locate, bookmarks and user menu with navigation (%M macro) gf - navigate previously active view to currently selected item. Leaves menu mode except for grep menu. Pressing Enter key has the same effect. e - open selected path in the editor, stays in menu mode. c - leave menu preserving file selection and insert file name after :! in command-line mode. User menu without navigation (%m macro) c leaves menu preserving file selection and inserts whole line after :! in command-line mode. Grep menu Selecting file (via Enter or l key) opens it in editor set by ’vicmd’ at given line number. Menu won’t be closed automatically to allow viewing more than one result. See above for "gf" and "e" keys description. Command-line history menu Selecting an item executes it as command-line command, search query or local filter. c leaves menu preserving file selection and inserts line into command-line of appropriate kind. Volumes menu Selecting a drive navigates previously active pane to the root of that drive. Fileinfo dialog Enter, q - close dialog Sort dialog h, Space
- switch ascending/descending. One shortcut per sorting key (see the dialog). Attributes (permissions or properties) dialog h, Space
- check/uncheck. Item states:
Custom viewsDefinition Normally file views contain list of files from a single directory, but sometimes it’s useful to populate them with list of files that do not belong to the same directory, which is what custom views are for. Presentation Custom views are still related to directory they were in before custom list was loaded. Path to that directory (original directory) can be seen in the title of a custom view. Files in same directory have to be named differently, this doesn’t hold for custom views thus seeing just file names might be rather confusing. In order to give an idea where files come from and when possible, relative paths to original directory of the view is displayed, otherwise full path is used instead. Custom views normally don’t contain any inexistent files. Navigation Custom views have some differences related to navigation in regular views. gf - acts
similar to gf on symbolic links and navigates to the file at
its real h, gh - return to the original directory. Opening ".." entry also causes return to the original directory. History Custom list exists only while it’s visible, once left one can’t return to it, so there is no appearances of it in any history. Filters Only local filter affects content of the view. This is intentional, presumably if one loads list, precisely that list should be displayed (except for inexistent paths, which are ignored). Search Although directory names are visible in listing, they are not searchable. Only file names are taken into account (might be changed in future, searching whole lines seems quite reasonable). Sorting Contrary to search sorting by name works on whole visible part of file path. Highlight Whole file name is highlighted as one entity, even if there are directory elements. Updates Reloads can occur, though they are not automatic due to files being scattered among different places. On a reload, inexistent files are removed and meta-data of all other files is updated. Once custom view forgets about the file, it won’t add it back even if it’s created again. So not seeing file previously affected by an operation, which was undone is normal. Operations All operations that add files are forbidden for custom views. For example, moving/copying/putting files into a custom view doesn’t work, because it doesn’t make much sense. On the other hand, operations that use files of a custom view as a source (e.g. yanking, copying, moving file from custom view, deletion) and operations that modify names are all allowed. StartupOn startup vifm determines several variables that are used during the session. They are determined in the order they appear below. On *nix systems
$HOME is normally present and used as is. On Windows systems
vifm tries to find correct home directory in the following
order: vifm tries to
find correct configuration directory by checking the
following places: vifm tries to
find correct configuration file by checking the following
places: ConfigureSee "Startup" section above for the explanations on $VIFM and $MYVIFMRC. The vifmrc file contains commands that will be executed on vifm startup. There are two such files: global and local. Global one is at {prefix}/etc/vifm/vifmrc, see $MYVIFMRC variable description for the search algorithm used to find local vifmrc. Global vifmrc is loaded before the local one, so that the later one can redefine anything configured globally. Use vifmrc to set settings, mappings, filetypes etc. To use multi line commands precede each next line with a slash (whitespace before slash is ignored, but all spaces at the end of the lines are saved). For example: set
\smartcase
equals "setsmartcase". When set<space here>
\ smartcase
equals "set smartcase". The $VIFM/vifminfo file contains session settings. You may edit it by hand to change the settings, but it’s not recommended to do that, edit vifmrc instead. You can control what settings will be saved in vifminfo by setting 'vifminfo' option. Vifm always writes this file on exit unless ’vifminfo’ option is empty. Marks, bookmarks, commands, histories, filetypes, fileviewers and registers in the file are merged with vifm configuration (which has bigger priority). Generally, runtime configuration has bigger priority during merging, but there are some exceptions:
The $VIFM/scripts directory can contain shell scripts. vifm modifies its PATH environment variable to let user run those scripts without specifying full path. All subdirectories of the $VIFM/scripts will be added to PATH too. Script in a subdirectory overlaps script with the same name in all its parent directories. The $VIFM/colors/ and {prefix}/etc/vifm/colors/ directories contain color schemes. Available color schemes are searched in that order, so on name conflict the one in $VIFM/colors/ wins. Each color scheme should have ".vifm" extension. This wasn’t the case before and for this reason the following rules apply during lookup:
Automatic FUSE mountsvifm has a builtin support of automated FUSE file system mounts. It is implemented using file associations mechanism. To enable automated mounts, one needs to use a specially formatted program line in filetype or filextype commands. Currently two formats are supported: 1) FUSE_MOUNT This format should be used in case when all information needed for mounting all files of a particular type is the same. E.g. mounting of tar files don’t require any file specific options. Format line:
Example filetype command: :filetype FUSE_MOUNT|fuse-zip %SOURCE_FILE %DESTINATION_DIR 2) FUSE_MOUNT2 This format allows one to use specially formatted files to perform mounting and is useful for mounting remotes, for example remote file systems over ftp or ssh. Format line:
Example filetype command: :filetype FUSE_MOUNT2|sshfs %PARAM %DESTINATION_DIR Example file content: root@127.0.0.1:/ All % macros
are expanded by vifm at runtime and have the following
meaning: %FOREGROUND is an optional macro. Other macros are not mandatory, but mount commands likely won’t work without them. %CLEAR is obsolete name of %FOREGROUND, which is still supported, but might be removed in future. Its use is discouraged. The mounted FUSE file systems will be automatically unmounted in two cases:
View lookvifm supports displaying of file list view in two different ways:
The look is local for each view and can be chosen by changing value of the 'lsview' boolean option. Depending on view look some of keys change their meaning to allow more natural cursor moving. This concerns mainly h, j, k, l and other similar navigation keys. Also some of options can be ignored if they don’t affect view displaying in selected look. For example value of ’viewcolumns’ when ’lsview’ is set. ls-like viewWhen this view look is enabled by setting ’lsview’ option on, vifm will display files in multiple columns. Number of columns depends on the length of the longest file name present in current directory of the view. Whole file list is automatically reflowed on directory change, terminal or view resize. View looks close to output of ’ls -x’ command, so files are listed left to right in rows. In this mode file manipulation commands (e.g. d) don’t work line-wise like they do in Vim, since such operations would be uncommon for file manipulating tasks. Thus, for example, dd will remove only current file. Column viewView columns
are described by a comma-separated list of column
descriptions, each of which has the following format So it basically
consists of four parts: Alignment specifier It’s an optional minus or asterisk sign as the first symbol of the string. Specifies type of text alignment within a column. Three types are supported:
set viewcolumns=-{name}
set viewcolumns={name}
It’s like left alignment, but when the text is bigger than the column, the alignment is made at the right (so the part of the field is always visible). set viewcolumns=*{name}
Width specifier It’s a number followed by a percent sign, two numbers (second one should be less than or equal to the first one) separated with a dot or a single number. Specifies column width and its units. There are three size types:
set viewcolumns=-100{name},20.15{ext}
results in two columns with lengths of 100 and 20 and a reserved space of five characters on the left of second column.
set viewcolumns=-80%{name},15%{ext},5%{mtime}
results in three columns with lengths of 80/100, 15/100 and 5/100 of view width.
set viewcolumns=-{name},{ext},{mtime}
results in three columns with length of one third of view width. There is no size adjustment to content, since it will slow down rendering. Columns of different sizing types can be freely mixed in one view. Though sometimes some of columns can be seen partly or be completely invisible if there is not enough space to display them. Column name This is just a sort key surrounded with curly braces, e.g. {name},{ext},{mtime}
{name} and {iname} keys are the same and present both for consistency with 'sort' option. Empty curly braces ({}) are replaced with the default secondary column for primary sort key. So after the next command view will be displayed almost as if ’viewcolumns’ is empty, but adding ellipsis for long file names: set viewcolumns=-{name}..,6{}.
Cropping specifier It’s from one to three dots after closing curly brace in column format. Specifies type of text truncation if it doesn’t fit in the column. Currently three types are supported:
set viewcolumns=-{name}.
results in truncation of names that are too long too fit in the view.
set viewcolumns=-{name}..
results in that ellipsis are added at the end of too long file names.
set viewcolumns=-{name}...,{ext}
results in that long file names can partially be written on the ext column. Color schemesThe color schemes in vifm can be applied in two different ways:
Both types are set using :colorscheme command, but of different forms:
Look of different parts of the TUI (Text User Interface) is determined in this way:
There might be a set of local color schemes because they are structured hierarchically according to file system structure. For example, having the following piece of file system: ~
’-- bin
|
’-- my
Two color schemes: # ~/.vifm/colors/for_bin highlight Win cterm=none ctermfg=white ctermbg=red highlight CurrLine cterm=none ctermfg=red ctermbg=black # ~/.vifm/colors/for_bin_my highlight CurrLine cterm=none ctermfg=green ctermbg=black And these three commands in the vifmrc file: colorscheme Default colorscheme for_bin ~/bin colorscheme for_bin_my ~/bin/my File list will look in the following way for each level:
black background
red background
red background Trash directoryvifm has support of trash directory, which is used as temporary storage for deleted files or files that were cut. Using trash is controlled by the 'trash' option, and exact path to the trash can be set with ’trashdir’ option. Trash directory in vifm differs from the system-wide one by default, because of possible incompatibilities of storing deleted files among different file managers. But one can set ’trashdir’ to "~/.local/share/Trash" to use a "standard" trash directory. There are two scenarios of using trash in vifm:
The first scenario uses deletion ("d") operations to put files to trash and put ("p") operations to restore files from trash directory. Note that such operations move files to and from trash directory, which can be long term operations in case of different partitions or remote drives mounted locally. The second scenario uses deletion ("d") operations for moving files to trash directory and :empty command-line command to purge all previously deleted files. Deletion and put operations depend on registers, which can point to files in trash directory. Normally, there are no nonexistent files in registers, but vifm doesn’t keep track of modifications under trash directory, so one shouldn’t expect value of registers to be absolutely correct if trash directory was modified not by operation that are meant for it. But this won’t lead to any issues with operations, since they ignore nonexistent files. Client-Servervifm supports remote execution of command-line mode commands as well as remote changing of directories. This is possible using --remote command-line argument. To execute a command remotely combine --remote argument with -c <command> or +<command>. For example: vifm --remote -c ’cd /’ vifm --remote ’+cd /’ To change directory not using command-line mode commands one can specify paths right after --remote argument, like this: vifm --remote / vifm --remote ~ vifm --remote /usr/bin /tmp PluginPlugin for using vifm in vim as a file selector. Commands: :EditVifm
select a file or files to open in the current buffer. Each command accepts up to two arguments: left pane directory and right pane directory. After arguments are checked, vifm process is spawned in a special "file-picker" mode. To pick files just open them either by pressing l, i or Enter keys, or by running :edit command. If no files are selected, file under the cursor is opened, otherwise whole selection is passed to the plugin and opened in vim. The plugin have only two settings. It’s a string variable named g:vifm_term to let user specify command to run GUI terminal. By default it’s equal to 'xterm -e'. And another string variable named g:vifm_exec, which equals "vifm" by default and specifies path to vifm’s executable. To pass arguments to vifm use g:vifm_exec_args, which is empty by default. To use the plugin copy the vifm.vim file to either the system wide vim/plugin directory or into ~/.vim/plugin. If you would prefer not to use the plugin and it is in the system wide plugin directory add let loaded_vifm=1 to your ~/.vimrc file. ReservedThe following command names are reserved and shouldn’t be used for user commands. g[lobal] ENVIRONMENT
MYVIFMRC Points to main configuration file (usually ~/.vifm/vifmrc). These environment variables are valid inside vifm and also can be used to configure it by setting some of them before running vifm. When $MYVIFMRC isn’t set, it’s made as $VIFM/vifmrc (exception for Windows: vifmrc in the same directory as vifm.exe has higher priority than $VIFM/vifmrc). See
"Startup" section above for more details. On execution of external commands this variable is set to the full path of file used to initiate FUSE mount of the closes mount point from current pane directory up. It’s not set when outside FUSE mount point. When vifm is used inside terminal multiplexer, it tries to set this variable as well (it doesn’t work this way on its own). SEE ALSOvifm-convert-dircolors(1), vifm-pause(1) Website:
https://vifm.info/ Esperanto
translation of the documentation by Sebastian Cyprych: AUTHORVifm was
written by ksteen <ksteen@users.sourceforge.net> |
